machinehead

The skype download from http://www.skype.com/intl/en/download/skype/linux/ assumes that Fedora is 32bit. For a 64 bit install and if you do not want to download the standalone version and move files to the various directories (which I think is too complex and difficult to maintain), you can download the required 32 bit rpm from the following site. http://download.fedora.redhat.com/pub/fedora/linux/extras/6/i386/ nas-1.9-1.fc6.i386.rpm libsigc++20-2.0.17-2.i386.rpm qt4-4.3.2-1.fc6.i386.rpm qt4-x11-4.3.2-1.fc6.i386.rpm Simply in similar order (nas is a pre-requisite for qt4-x11) rpm -ivh nas-1.9-1.fc6.i386.rpm rpm -ivh libsigc++20-2.0.17-2.i386.rpm rpm -ivh qt4-4.3.2-1.fc6.i386.rpm rpm -ivh qt4-x11-4.3.2-1.fc6.i386.rpm After you have done this, rpm -ivh the Skype RPM downloaded from the skype site. I used -nodeps initially, but with the required RPMs, you should not have to do this.

I've just upgraded my PC. Upgrades tend to be a bit tricky as mostly its trying to merge old with new. One of my prized old parts is my old Adaptec PCI SCSI adapter which runs my SCSI drive. Instead of using the SCSI drive as a dedicated music disk like previously, I thought about using as my boot disk for Windows XP. I also had 2 x 320 GB SATA drives which I wanted to use as raid 0 data disk. The problem with this drive setup was when XP was installed and booted, it never detected the 2 x SATA drives in raid mode. I also noticed in BIOS mode, the raid adapter configuration screen (Ctrl-"I") never appeared. After moments of rebooting, I caught a glimpse of a line that said, "not enough space...". Hitting the Ctrl-A key during booting of the SCSI card, I disabled the SCSI bios and selected to not boot Bios and still scan SCSI bus to detect hard drives. And it worked, but only boots from the Intel SATA raid drives. Now I am forced to use Vista because Vista alrea...