Network camera as motion sensor for lights
Here's a guide to use an old network cctv feed as a motion sensor for lights.
https://motion-project.github.io/
Here's what we need
1. URL for jpg feed from the network camera
The URL varies for different brands and models.
Example URL: http://
2. Raspberry pi with domoticz (already integrated with lights, e.g. hue)
On the raspberry pi, download Motion
$ sudo apt-get motion
Modify the /etc/motion/motion.conf file (Refer to the motion documentation)
I removed the following from the motion.conf create a new thread file for each video source
comment out in /etc/motion/motion.conf
; videodevice /dev/video0
; target_dir /var/lib/motion
; stream_port 8081
I also changed the webcontrol_port to 8000 as 8080 conflicts with the default domoticz port.
;webcontrol_port 8080
webcontrol_port 8000
thread /etc/motion/camera.conf
The following is an example of a tread file called camera.conf.
netcam_userpass
text_left Camera
netcam_url http://netcam_ip
target_dir /mnt/nas/camera
stream_port 8001
on_event_start /usr/bin/curl -s "http://domoticz_ip
on_event_end /usr/bin/curl -s "http://domoticz_ip
The variables you need to replace are:
Make sure that the steam_port is not already used on the pi and for each camera, to change the stream port.
Optional
If you want to have a bit more smarts for the motion sensor rather than having to keep turning on and off the motion process at night, create a Motion detection dummy virtual device on domoticz and replace that lightswitch id with the motion sensor.
It is possible to use the apple homekit/homebridge to add the virtual motion sensor to apple home and created an automation to set it for only turn on the light at night and when someone is home.
Comments